Below you can download zebra zxp series 9 driver for Windows.
File name: zebra-zxp-series9.exe
Version: 8.625
File size: 42339 MB
Upload source: original install disk
Antivirus software passed: Panda v 2.32
Download Driver Zebra Zxp Series 9(click above to download)
Device Specification: Zebra Zxp Series 9
- Printer type: Card printer
- Print technology: Dye sublimation (direct-to-card)
- Card capacity: Single-sided or dual-sided printing
- Print resolution: 300 dpi
- Print speed: Color - up to 190 cards per hour, Monochrome - up to 2000 cards per hour
- Card size: CR-80 (86mm x 54mm)
- Connectivity: USB, Ethernet
- Encoding options: Magnetic stripe, Smart card, Contactless encoding
- Power requirements: AC 100-240V, 50-60Hz
- Operating system support: Windows, Mac, Linux
- Dimensions: 544mm (W) x 335mm (H) x 306mm (D)
- Weight: 14.7 kg
Troubleshooting Questions and Answers:
Q1: Why is my Zebra Zxp Series 9 printer not powering on?
A1: Ensure that the power cable is securely plugged into both the printer and a functioning power outlet. Also, check if the power switch on the back of the printer is turned on. If the issue persists, try connecting the printer to a different power source or contact customer support for further assistance.
Q2: Why is the printed image quality of my Zebra Zxp Series 9 printer poor?
A2: Poor image quality can be caused by various factors. First, check if the ribbon cartridge is properly installed and if there is sufficient ribbon remaining. Also, ensure that the printhead is clean and free from dust or debris. Adjust the print density settings if necessary. If the problem continues, consider replacing the ribbon or contacting technical support.
Q3: Why is my Zebra Zxp Series 9 printer not recognizing the smart card for encoding?
A3: If the smart card is not being recognized, confirm that it is correctly inserted into the encoding module and properly aligned. Ensure that the card type is supported by the printer and that the smart card encoding feature is enabled in the printer's software settings. If the issue persists, try using a different smart card or consult the user manual for specific troubleshooting steps.