Below you can download cp2102 windows 10 driver for Windows.
File name: cp2102_win10.exe
Version: 8.105
File size: 16.59 MB
Upload source: manufactuter website
Antivirus software passed: G Data ver. 3.11
Cp2102 Driver Windows 10 Download(click above to download)
Device Specification:
- The device in question is the Cp2102 Driver for Windows 10.
- It is a software driver used to establish communication between the Cp2102 USB-to-UART bridge and a computer running on the Windows 10 operating system.
- The driver enables the computer to recognize and properly communicate with devices that utilize the Cp2102 USB-to-UART bridge, such as microcontrollers, development boards, and other electronic devices.
- The Cp2102 driver uses USB (Universal Serial Bus) to establish a virtual COM port connection between the computer and the connected device, allowing for bi-directional data transfer.
- It is compatible with both 32-bit and 64-bit versions of Windows 10.
- The driver supports various baud rates, data bits, stop bits, and parity settings to accommodate different communication requirements.
- It is widely used in the field of embedded systems, prototyping, and development.
Troubleshooting Questions and Answers:
1. Question: Why is my Cp2102 device not being recognized by Windows 10?
Answer: Make sure the Cp2102 driver is properly installed on your computer. Check the Device Manager to see if there are any driver-related issues. Also, ensure the device is securely connected to the computer and try using a different USB cable or port if necessary.
2. Question: Why am I experiencing intermittent connectivity issues with my Cp2102 device on Windows 10?
Answer: Check for any USB power management settings that may be causing the device to disconnect or enter a low-power state. Disable selective suspension in the Windows power options or adjust the USB settings in the computer's BIOS. Also, ensure that no other software or drivers are conflicting with the Cp2102 driver.
3. Question: My Cp2102 device is not transmitting or receiving data properly. What could be the problem?
Answer: Verify the correct baud rate, data bits, stop bits, and parity settings are configured on both the Cp2102 device and the software/application it communicates with. Ensure that the device firmware or software running on the device is functioning correctly and supports the chosen communication parameters. Additionally, check if any data flow control settings need to be adjusted for proper data transmission.