Below you can download hp designjet 500 windows 10 autocad 2016 driver for Windows.
File name: hp-designjet500_win10-autocad2016.exe
Version: 7.524
File size: 15.55 MB
Upload source: original install disk
Antivirus software passed: Eset ver. 2.42
Hp Designjet 500 Driver Windows 10 Autocad 2016(click above to download)
Specifications of the HP DesignJet 500:
- Printer type: Large-format inkjet printer
- Supported operating systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows XP, and Mac OS X
- Driver compatibility: HP DesignJet 500 driver available for Windows 10 and Autocad 2016
- Ink type: Dye-based (color) and pigment-based (black)
- Maximum color print resolution: 2400 x 1200 dpi
- Print speed: Up to 85 square feet per hour (color) and up to 180 square feet per hour (black)
- Media handling: Roll feed, automatic sheet feed, and manual single-sheet feed
- Connectivity: USB 2.0 (high-speed) and parallel port
- Memory: 16 MB RAM (expandable up to 160 MB)
- Dimensions (W x D x H): 49.7 x 19.3 x 13.4 inches
- Weight: 86.9 lbs
Troubleshooting questions and answers:
Q1: Why is the printer not responding when I try to print?
A1: Firstly, ensure that the printer is connected properly to the computer via USB or parallel port. Check if the printer's power cable is securely plugged in and turned on. Additionally, make sure that the correct printer driver is installed on your computer.
Q2: How can I resolve paper jam issues with the HP DesignJet 500?
A2: If a paper jam occurs, gently remove the jammed paper using both hands, being careful not to tear it. Unplug the power cord from the back of the printer, open the paper path cover, and remove any remaining paper fragments. Close the paper path cover and plug in the power cord again. Always use the appropriate paper size and type recommended for the printer.
Q3: Why am I experiencing poor print quality or smudged prints?
A3: To improve print quality, check if the ink cartridges are properly installed and have sufficient ink levels. Perform a print head cleaning utility from the printer's control panel or software. Also, ensure that the correct media type is selected in the printer driver settings. If the issue persists, align the print heads using the printer's alignment utility or replace any excessively worn-out ink cartridges.
(Note: These troubleshooting questions and answers are general guidelines and may not cover every possible issue with the device.)