Below you can download hp q5987a driver for Windows.
File name: hp-q5987a.exe
Version: 5.479
File size: 15.83 MB
Upload source: other website
Antivirus software passed: Kaspersky v. 2.42
Hp Q5987A Driver Download(click above to download)
Device Specification
- Model: Hp Q5987A
- Type: Printer
- Connectivity: USB 2.0, Ethernet
- Printing Technology: Laser
- Print Resolution: Up to 1200 x 1200 dpi
- Print Speed: Up to 35 ppm
- Paper Handling: 250-sheet input tray, 150-sheet output tray
- Duplex Printing: Automatic
- Media Sizes: Letter, Legal, Executive, A4, A5, A6, B5, B6, Postcards, Envelopes (No.10, Monarch)
- Printer Language: PCL5, PCL6, PostScript Level 3 emulation
- Operating Systems Compatibility: Windows, Mac, Linux
Troubleshooting Questions and Answers
1. Question: Why is my Hp Q5987A printer not printing anything?
Answer: There could be multiple reasons for this issue. First, ensure that the printer has sufficient paper and toner. Check if there are any paper jams or if the toner cartridge needs to be replaced. Verify that the printer is connected properly to the computer and that the appropriate drivers are installed. Restart the printer and try printing a test page.
2. Question: How do I resolve paper jam issues in my Hp Q5987A printer?
Answer: If you encounter a paper jam, follow these steps for troubleshooting:
- Turn off the printer and unplug it from the power source.
- Open the printer cover and gently remove any visible jammed paper, avoiding any tearing.
- Check all access points (input tray, output tray, rear access door) for any obstruction and remove if found.
- Ensure that the paper is loaded correctly in the input tray and not exceeding the maximum limit.
- Close all printer covers securely and plug it back in. Power on the printer and retry printing.
3. Question: The print quality of my Hp Q5987A printer is poor. How can I improve it?
Answer: To enhance the print quality, follow these steps:
- Check the toner levels and replace the toner cartridge if necessary.
- Ensure that the paper used meets the recommended specifications for the printer.
- Clean the printer's internal components, such as the transfer roller and the corona wire, as per the manufacturer's instructions.
- Adjust the print density or quality settings in the printer driver software to a higher value.
- If the