Below you can download for zebra gk420t driver for Windows.
File name: for-zebra-gk420t.exe
Version: 2.500
File size: 44544 MB
Upload source: original install disk
Antivirus software passed: Kaspersky 4.89
Download Driver For Zebra Gk420T(click above to download)
Device Specification:
- Device Name: Zebra GK420T
- Type: Thermal Transfer Barcode Label Printer
- Model Number: GK42-102520-000
- Connectivity: USB, Serial, and Ethernet ports
- Print Method: Direct Thermal and Thermal Transfer
- Print Resolution: 203 dpi (8 dots/mm)
- Maximum Print Speed: 5 inches per second
- Print Width: 4.09 inches (104 mm)
- Media Types: Continuous, Fanfold, and Die-cut Labels
- Media Width: 0.75 inches to 4.25 inches (19 mm to 108 mm)
- Media Length: 0.38 inches to 39 inches (9.7 mm to 990 mm)
- RAM Memory: 8 MB SDRAM
- Flash Memory: 4 MB Flash
- Power Source: Auto-ranging power supply 100-240 VAC, 50-60 Hz
- Supported Operating Systems: Windows, Mac, and Linux
- Dimensions: 6.8 inches (172.7 mm) H x 7.6 inches (194 mm) W x 10 inches (254 mm) D
- Weight: 4.6 lbs (2.1 kg)
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra GK420T not printing any labels?
A: Possible causes for this issue could be a misconfigured print driver, an empty or incorrectly installed label roll, or a faulty printhead. Check the print driver settings, make sure the label roll is loaded correctly, and inspect the printhead for any damage or improper installation.
2. Q: My Zebra GK420T is displaying a "No Media" error. How can I resolve this?
A: The "No Media" error typically occurs when the printer doesn't detect any label stock. Ensure that the media sensor is properly aligned and not obstructed. Also, check the label roll, make sure it is loaded correctly, and that the printer is configured to use the correct label size.
3. Q: Why is my Zebra GK420T printing labels with faded or streaked print quality?
A: Faded or streaked print quality could be due to several reasons. Check if the printhead is dirty or contaminated; clean it if necessary. Additionally, verify that the print density settings are correctly configured in the print driver. Lastly, ensure that you are using genuine Zebra