Below you can download how to scansnap ix500 driver for Windows.
File name: how-to-scansnap-ix500.exe
Version: 3.515
File size: 16.93 MB
Upload source: original install disk
Antivirus software passed: Kaspersky version 2.34
How To Download Scansnap Ix500 Driver(click above to download)
Device Specification:
- Device Name: ScanSnap iX500
- Manufacturer: Fujitsu
- Scanner Type: Duplex scanning with ADF (Automatic Document Feeder)
- Compatible Operating Systems: Windows and macOS
- Resolution: Up to 600 dpi
- Scan Speed: 25 pages per minute (color, grayscale, and black & white)
- Paper Size: A4, A5, A6, B5, B6, Business Card, Post Card, Letter, Legal, Custom Size (Max: 8.5 x 14.17 inches)
- Scan Modes: Simplex, Duplex, Automatic Color Detection, Automatic Size Detection, Automatic Deskew, Automatic Image Orientation
- Connectivity: USB 3.0, Wi-Fi
- Supported File Formats: PDF, Searchable PDF, JPEG, Word, Excel, PowerPoint, Business Card, etc.
- Power Source: AC 100 to 240 V, 50 / 60 Hz
- Dimensions: 11.5 x 6.2 x 6.6 inches
- Weight: 6.63 lbs
Troubleshooting Questions and Answers:
Q1: Why is my ScanSnap iX500 not scanning any documents?
A1: There could be several reasons for this issue. First, ensure that the scanner is properly connected to your computer via USB or Wi-Fi. If the connection is fine, check if the document feeder is properly loaded and not jammed. Additionally, make sure you have the latest ScanSnap iX500 driver software installed on your computer.
Q2: How can I fix the issue of scanned documents appearing blurry or unclear?
A2: Blurry or unclear scanned documents can be due to various factors. Firstly, ensure that the scanner glass is clean and free from smudges or dust particles. If the issue persists, adjust the scanner's resolution settings to a higher value (e.g., 600 dpi). It is also recommended to use a suitable document placement and apply features like deskew and image orientation in the scanning software.
Q3: Why is my ScanSnap iX500 not connecting to my Wi-Fi network?
A3: If your scanner is unable to connect to your Wi-Fi network, check if the Wi-Fi indicator on the scanner is turned on. Make sure you are within range of the Wi-Fi signal and that the network name and password are correctly entered during the setup process. If the issue persists, try power cycling both