Below you can download xerox phaser 3124 driver for Windows.
File name: xerox-phaser3124.exe
Version: 5.133
File size: 45261 MB
Upload source: other website
Antivirus software passed: F-Secure ver. 4.13
Download Driver Xerox Phaser 3124(click above to download)
Device Specification:
- Brand: Xerox
- Model: Phaser 3124
- Type: Laser printer
- Print Technology: Monochrome laser
- Print Speed: Up to 24 ppm (pages per minute)
- Print Resolution: Up to 1200 x 1200 dpi (dots per inch)
- Paper Capacity: 250 sheets
- Processor: 150 MHz
- Memory: 32 MB
- Connectivity: USB 2.0
- Supported Operating Systems: Windows, Mac, Linux
- Dimensions (W x D x H): 14.3 x 11.8 x 8.4 inches
- Weight: 19.4 lbs
Troubleshooting Questions and Answers:
1. Q: Why is my Xerox Phaser 3124 not printing?
A: There could be several reasons for this issue. Please try these troubleshooting steps:
- Ensure the printer is turned on and connected to the computer properly.
- Check if there are any error messages on the printer's display panel.
- Verify that there is paper in the tray and that it is loaded correctly.
- Make sure the printer has enough toner and replace the toner cartridge if necessary.
- Restart both the printer and the computer, then try printing again.
2. Q: The print quality of my Phaser 3124 is poor. How can I improve it?
A: If you are experiencing low print quality, follow these suggestions:
- Check the toner level and replace the cartridge if it is low.
- Clean the printer's interior and exterior using a lint-free cloth.
- Adjust the print resolution settings to a higher quality if necessary.
- Run a printer cleaning cycle from the control panel or printer software.
- If the issue persists, try reinstalling the printer driver and check for any software updates.
3. Q: My Xerox Phaser 3124 is displaying a paper jam error. What should I do?
A: When encountering a paper jam error, follow these steps to resolve the issue:
- Turn off the printer and unplug it from the power source.
- Carefully remove any stuck paper by following the instructions in the user manual.
- Check the paper path for any torn pieces or debris and clean if necessary.
- Reinstall the paper tray properly and ensure it is loaded with the correct paper size.
- Reset the printer by plugging it back in