Below you can download ethernet network controller windows 10 driver for Windows.
File name: ethernet-network-controller_win10.exe
Version: 4.348
File size: 19176 MB
Upload source: original install disk
Antivirus software passed: AVG v. 3.94
Ethernet Network Controller Driver Windows 10(click above to download)
Device Specification:
- Ethernet Network Controller Driver
- Compatible with Windows 10 operating system
Troubleshooting Questions and Answers:
1. Q: How do I check if the Ethernet Network Controller Driver is installed correctly on Windows 10?
A: To check the driver installation, follow these steps:
1. Go to the Control Panel.
2. Select "Device Manager."
3. Expand the "Network adapters" section.
4. Look for the Ethernet Network Controller and check if it displays any error symbols or warnings.
5. If the driver is installed correctly, it should not show any errors, and the device should be listed.
2. Q: Why is my Ethernet network connection not working after installing the driver on Windows 10?
A: If the Ethernet network connection is not working after driver installation, try these troubleshooting steps:
1. Ensure the Ethernet cable is securely connected to the computer and network device.
2. Restart your computer and the network device (router/modem).
3. Check if the Ethernet port on your computer is enabled by going to the "Network Connections" settings.
4. Update the Ethernet Network Controller Driver by visiting the manufacturer's website or by using a driver update utility.
5. If the issue persists, there might be a hardware problem with the Ethernet Network Controller, and you may need to contact technical support for further assistance.
3. Q: I am unable to connect to the internet through Ethernet even after installing the driver. What could be the problem?
A: If you are unable to connect to the internet through Ethernet, consider the following troubleshooting steps:
1. Check if the Ethernet cable is functional by using a different cable or testing it on another device.
2. Ensure your router/modem is providing an internet connection by connecting a different device (e.g., laptop or smartphone) directly via Ethernet.
3. Verify that the network settings on Windows 10 are configured correctly and are compatible with your network. Check for any IP address conflicts, DNS settings, or proxy configurations that might be causing the issue.
4. Disable any firewalls or antivirus software temporarily to rule out any blocking of network connections.
5. If all else fails, contact your Internet Service Provider (ISP) to check for any network issues or configuration problems on their end.