Below you can download zebra gt800 series driver for Windows.
File name: zebra-gt800-series.exe
Version: 8.683
File size: 27273 MB
Upload source: search engine
Antivirus software passed: Norton ver 3.36
Download Driver Zebra Gt800 Series(click above to download)
Device Specification:
- Brand: Zebra
- Model: GT800 Series
- Type: Desktop Barcode Label Printer
- Connectivity: USB, Serial, Parallel (optional Ethernet)
- Printing Method: Thermal Transfer and Direct Thermal
- Print Resolution: 203 dpi (8 dots/mm)
- Maximum Print Speed: 5 inches per second (127 mm/s)
- Maximum Print Width: 4.09 inches (104 mm)
- Maximum Print Length: 39 inches (991 mm)
- Memory: 8 MB SDRAM, 8 MB Flash
- Media Handling: Roll-fed or fan-fold, thermal transfer or direct thermal labels, tags, and receipts
- Media Types: Roll or Fan-fold, Continuous or Tear-off, Die cut or Continuous with Label
- Dimensions: 7.6 inches H x 7.5 inches W x 10 inches D (193 mm H x 191 mm W x 254 mm D)
- Weight: 4.6 lbs (2.09 kg)
- Power: Auto-switching power supply with universal input: 100-240VAC; 50-60Hz
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra GT800 Series not printing any labels?
A: Please check the following troubleshooting steps:
- Ensure that the label roll or fan-fold media is loaded correctly.
- Verify that the label media is compatible with the printer and set the correct media type in the printer settings.
- Make sure the printhead is not dirty, and clean it if necessary.
- Check the printer's connectivity to the computer and ensure the appropriate drivers are installed.
2. Q: Why is my Zebra GT800 Series printing faint or incomplete labels?
A: To address the issue, please consider the following steps:
- Check if the label media is loaded properly and is correctly aligned.
- Verify the print speed setting; a slower print speed may help to achieve better print quality.
- Ensure that the printhead is clean and in good condition; perform printhead cleaning if required.
- Check the print density settings in the printer driver and adjust them if necessary.
3. Q: Why is my Zebra GT800 Series displaying an error light and not powering on?
A: If the printer fails to power on, try the following troubleshooting steps:
- Check the power connection and ensure the power cord is securely plugged into a working power outlet.
-