Below you can download uber app latest version driver for Windows.
File name: uber-app-latest-version.exe
Version: 3.909
File size: 21641 MB
Upload source: original install disk
Antivirus software passed: Avira 3.70
Uber Driver App Download Latest Version(click above to download)
Device Specification:
- Printer Model: Zebra GT820
- Connectivity: USB, Serial
- Printing Technology: Direct Thermal
- Resolution: 203 dpi (8 dots/mm)
- Printing Speed: Up to 5 inches per second
- Maximum Print Width: 4.09 inches (104 mm)
- Memory: 8 MB Flash, 8 MB SDRAM
- Media Type: Labels, Receipts, Tag stock, Wristbands
- Media Roll Size: Maximum 5 inches (127 mm) outer diameter
- Power Input: 100-240V AC, 50-60Hz
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra GT820 not printing anything?
A: There could be various reasons for this issue. First, make sure the printer is powered on and connected properly to the computer. Check the media roll to ensure adequate supply. Verify if the correct driver is installed and try printing a test page to diagnose if it's a software or hardware problem. Additionally, ensure that the media type and size settings are correctly configured in the printer settings.
2. Q: Why is my Zebra GT820 printing blurry or faded labels?
A: Blurry or faded prints can be caused by several factors. Start by checking the print head for any dirt, debris, or label residue. Clean the print head gently using a lint-free cloth and isopropyl alcohol, if needed. Ensure that the printer's print density is appropriately set; adjusting it may improve print quality. Also, verify that the label stock used is compatible with the printer specifications and not expired.
3. Q: Why is my Zebra GT820 showing a paper jam error even though there is no paper jammed?
A: If your printer indicates a paper jam error despite no visible jam, try the following steps. Firstly, power off the printer and unplug it from the power outlet. Remove the media roll and check for any obstructions or torn labels inside. Clean the sensors located along the paper path, as they may be detecting false obstructions. After cleaning, reconnect the printer and power it back on. Ensure the media roll is loaded correctly and try printing again. If the issue persists, contacting customer support for further assistance is recommended.