Below you can download xerox b215 driver for Windows.
File name: xerox-b215.exe
Version: 6.843
File size: 26390 MB
Upload source: original install disk
Antivirus software passed: Eset ver. 5.84
Download Driver Xerox B215(click above to download)
Device Specification:
- Brand: Xerox
- Model: B215
- Type: All-in-One Laser Printer
- Print Technology: Laser
- Print Speed: Up to 31 ppm (pages per minute)
- Print Resolution: 1200 x 1200 dpi
- Copy Speed: Up to 31 cpm (copies per minute)
- Copy Resolution: 600 x 600 dpi
- Scan Resolution: Up to 1200 x 1200 dpi (optical), up to 4800 x 4800 dpi (interpolated)
- Fax Speed: 33.6 Kbps
- Paper Handling: 250-sheet input tray, 1-sheet manual feed slot, 50-sheet ADF (Automatic Document Feeder)
- Connectivity: USB 2.0, Wi-Fi 802.11n, Ethernet
Troubleshooting Questions and Answers:
1. Question: Why is my Xerox B215 printer not printing?
Answer: There can be multiple reasons for this issue. Please try the following troubleshooting steps:
- Make sure the printer is turned on and connected to the power source.
- Check if there are any error messages displayed on the printer's control panel.
- Verify that there is enough paper in the tray and it is properly loaded.
- Restart the printer and your computer, then try printing again.
2. Question: How do I resolve paper jam issues in my Xerox B215 printer?
Answer: If you are experiencing paper jam issues, please follow these steps to resolve the problem:
- Open the printer's front cover and gently remove any jammed paper, avoiding tearing it.
- Check for any small pieces of torn paper inside the printer and remove them.
- Ensure that the paper is loaded correctly in the tray, not exceeding the maximum capacity.
- Close the front cover, power off the printer, and wait for a few seconds before turning it back on.
- Try printing again to see if the issue is resolved.
3. Question: How can I fix the scanner not working on my Xerox B215?
Answer: If the scanner is not functioning properly, you can try the following troubleshooting steps:
- Ensure that the scanner lid is closed properly.
- Check for any obstructions or debris on the scanner bed, and clean it if necessary.
- Verify that the scanner drivers are properly installed on your computer.
- Update the scanner drivers