Below you can download kyocera fs-1040 driver for Windows.
File name: kyocera-fs-1040.exe
Version: 8.549
File size: 44245 MB
Upload source: manufactuter website
Antivirus software passed: Avira version 2.86
Download Driver Kyocera Fs-1040(click above to download)
Device Specification:
- Brand: Kyocera
- Model: FS-1040
- Type: Printer
- Connectivity: USB
- Print Technology: Laser
- Max. Media Size: Legal (216 x 356 mm)
- Print Speed: Up to 20 ppm
- Resolution: 1200 x 600 dpi
Troubleshooting Questions and Answers:
1. Q: Why is my Kyocera FS-1040 not printing?
A: There could be several reasons for this issue. Please make sure the printer is properly connected to the computer via USB, and check if there are any error messages displayed on the printer's control panel. Additionally, ensure that the printer has enough paper and toner.
2. Q: How do I resolve paper jam issues with Kyocera FS-1040?
A: If you encounter a paper jam while using the FS-1040, follow these steps to resolve the issue:
- Turn off the printer and unplug it from the power source.
- Open the printer's front cover and carefully remove any jammed paper.
- Check for any remaining scraps of paper inside the printer and remove them if found.
- Close the front cover, plug in the printer, and turn it back on. Try printing again.
3. Q: The print quality from my Kyocera FS-1040 is poor, what should I do?
A: To improve print quality, try the following:
- Check if the toner level is low and replace the toner cartridge if necessary.
- Clean the printer's internal components, including the corona wire and drum unit, using a lint-free cloth or brush specifically designed for printer cleaning.
- Adjust the print density settings through the printer's software or control panel to achieve better print quality.
- If the problem persists, it may be necessary to contact Kyocera support for further assistance.