Below you can download scanner epson l220 gratuit driver for Windows.
File name: scanner-epson-l220-gratuit.exe
Version: 6.134
File size: 44412 MB
Upload source: original install disk
Antivirus software passed: G Data v. 2.63
Download Driver Scanner Epson L220 Gratuit(click above to download)
Device Specification:
- Printer Model: HP LaserJet 1012
- Operating System Compatibility: Windows 10
- Printer Driver: HP LaserJet 1012 Printer Driver for Windows 10
- Printer Type: Monochrome Laser Printer
- Print Speed: Up to 15 ppm (pages per minute)
- Resolution: 600 x 600 dpi (dots per inch)
- Paper Handling: Manual Feed Slot, Input Capacity of 160 sheets, Output Capacity of 100 sheets
- Connectivity: USB 2.0
- Dimensions: 14.6 inches (width) x 9.1 inches (depth) x 8.2 inches (height)
- Weight: 13.0 lbs
Troubleshooting Questions and Answers:
1. Q: My HP LaserJet 1012 printer is not printing anything. What could be the possible reasons for this issue?
A: There could be various reasons why your printer is not printing. Please check the following:
- Ensure that the printer is properly connected to your computer via USB cable.
- Make sure the printer has sufficient paper and ink/toner levels.
- Verify that the printer driver is installed correctly and up to date.
2. Q: The print quality of my HP LaserJet 1012 printer has deteriorated. What can I do to improve it?
A: If you are experiencing a decline in print quality, you can try the following troubleshooting steps:
- Clean the printer's internal components, such as the drum and the fuser, following the manufacturer's instructions.
- Replace the toner cartridge if it's low on toner or nearing the end of its lifespan.
- Adjust the print settings and ensure that you have selected the appropriate print quality option for your needs.
3. Q: My HP LaserJet 1012 printer is displaying a paper jam error message. How can I clear the paper jam?
A: If you encounter a paper jam, follow these steps to clear it:
- Turn off the printer and unplug it from the power source.
- Carefully open the printer's access door and gently remove any jammed paper or torn pieces.
- Check for any residual paper fragments inside the printer and remove them.
- Close the access door, plug in the printer, and turn it back on. The paper jam issue should be resolved.