Qlogic Qle2560 Driver Download

[Belle93]

I have been searching everywhere for the driver download for the Qlogic Qle2560. I have tried visiting the official Qlogic website, but unfortunately, I couldn't find a specific driver for this particular model. I also checked various driver download websites, but to no avail. Could someone please help me by providing a direct link to download the driver? I would greatly appreciate any assistance. Thank you so much in advance!

[Detective]

Below you can download qlogic qle2560 driver for Windows.

File name: qlogic-qle2560.exe
Version: 7.637
File size: 17107 MB
Upload source: other website
Antivirus software passed: Kaspersky ver 2.93

Qlogic Qle2560 Driver Download

(click above to download)


Device Specification:

- Device Name: QLogic QLE2560
- Device Type: Fibre Channel Host Bus Adapter (HBA)
- Manufacturer: QLogic Corporation
- Interface: PCI Express Gen 2.0 x4
- Ports: Single Fibre Channel port
- Data Transfer Rate: 8 Gbps (full-duplex)
- Supported Standards:
- Fibre Channel: FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-PLDA, FC-TAPE, FC-SP, FC-HBA API V3, and SMI-S v1.5 through SMI-S v1.5.1
- SCSI: SCSI-FCP (ANSI X3T9.2/86-109)
- Operating System Compatibility: Windows, Linux, VMware, Oracle Solaris, IBM AIX, HP-UX, Citrix XenServer

Troubleshooting Questions and Answers:

1. Why is the QLogic QLE2560 not detected by my operating system?
- Check if the device is securely connected to the PCI Express slot.
- Ensure that the device driver is properly installed for your specific operating system.
- Verify that the device is functional by testing it on another compatible system.

2. How can I troubleshoot low data transfer rates with the QLogic QLE2560?
- Verify that the Fibre Channel port and cables are in good condition without any damage or loose connections.
- Ensure that the Fibre Channel switch or SAN fabric is also capable of supporting the 8 Gbps data transfer rate.
- Update the device driver and firmware to the latest versions provided by the manufacturer.

3. What should I do if the QLogic QLE2560 encounters frequent connection drops?
- Check the compatibility between the device driver version and your operating system. Update or reinstall the driver if necessary.
- Verify that the device's firmware is up to date and upgrade it if newer versions are available.
- Inspect the Fibre Channel cables and connectors for any signs of damage or wear and replace them if needed.

[Belle93]

Thank you so much for providing the link to the working Windows driver for the Qlogic Qle2560! I've been searching for this for a while and it's great to finally have it.