Below you can download hp laserjet p1102 for windows 10 64-bit driver for Windows.
File name: hp-laserjet-p1102-for_win1064-bit.exe
Version: 5.417
File size: 44305 MB
Upload source: original install disk
Antivirus software passed: Kaspersky ver 4.33
Driver Hp Laserjet P1102 For Windows 10 64-Bit(click above to download)
Prints black and white documents, capable of printing up to 18 pages per minute.
Specification:
- Printer type: Laser
- Print resolution: Up to 600 x 600 dpi
- Print speed: Up to 18 ppm
- Paper capacity: Up to 150 sheets
- Connectivity: USB 2.0
- Supported operating systems: Windows 10 (64-bit)
- Power source: 110V - 127V nominal at +/-10% (min 99V, max 140V), 50 - 60Hz nominal at +/-3Hz (min 47Hz, max 63Hz)
Troubleshooting Q&A:
Question 1: Why is my printer not responding to print commands?
Answer 1: Ensure that the printer is properly connected to the computer via the USB cable. Check if the printer driver is installed correctly and up to date. Restart both the computer and printer, then try printing again.
Question 2: How do I fix paper jams in the printer?
Answer 2: First, turn off the printer and disconnect the power cord. Carefully remove any jammed paper from the input and output trays of the printer. Check for any torn pieces of paper and remove them. After clearing the jam, reconnect the power cord and turn on the printer, then try printing again.
Question 3: My prints appear faded or have streaks on them. How can I resolve this issue?
Answer 3: Ensure that the toner cartridges are properly installed and not empty. If the toner levels are low, replace the cartridge with a new one. Clean the printer's interior using a clean, lint-free cloth or brush, removing any dust or debris that may be affecting the print quality. Adjust the print density settings in the printer driver software to improve the print output.