Below you can download tl-wn722n v3 driver for Windows.
File name: tl-wn722n-v3.exe
Version: 1.352
File size: 17.97 MB
Upload source: original install disk
Antivirus software passed: AVG version 2.46
Download Driver Tl-Wn722N V3(click above to download)
Device Specification:
- Model: TL-WN722N V3
- Interface: USB 2.0
- Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
- Frequency: 2.400-2.4835GHz
- Signal Rate: 11n: Up to 150Mbps, 11g: Up to 54Mbps, 11b: Up to 11Mbps
- Antenna: Detachable 4dBi Omni-directional antenna
- Wireless Security: Support 64/128 bit WEP, WPA-PSK/WPA2-PSK, WPA/WPA2, Wi-Fi Protected Setup (WPS)
- Compatibility: Windows 10/8.1/8/7/XP, Mac OS, Linux
Troubleshooting Questions and Answers:
1. Q: Why is my TL-WN722N V3 not connecting to my Wi-Fi network?
A: Firstly, ensure that your Wi-Fi network is functioning properly and other devices can connect to it. Secondly, make sure that the correct Wi-Fi password is entered in the device's wireless settings. Lastly, try updating the device driver to the latest version available from the official website.
2. Q: The signal strength of my TL-WN722N V3 is very weak. What can I do?
A: Position the device closer to your Wi-Fi router/access point to improve signal strength. Ensure there are no obstructions or interference sources between the device and the router. You can also try replacing the detachable antenna with a higher-gain one for better coverage.
3. Q: My TL-WN722N V3 is not recognized by my computer. What should I do?
A: Firstly, make sure that the device is firmly connected to a USB port on your computer. Try connecting it to a different USB port to rule out any port-related issues. Secondly, ensure that the device driver is installed correctly; you may need to uninstall and reinstall the driver. Finally, check if the device is compatible with the operating system you are using and update the operating system if necessary.