Tally Dascom 1430 Drivers
Tally Dascom 1430 Drivers
I am having trouble finding the drivers for my Tally Dascom 1430 printer. I have searched extensively on the manufacturer's website, as well as other driver download websites, but I have had no luck. Could someone please provide me with a direct link to the drivers? Any help would be greatly appreciated.
Re: Tally Dascom 1430 Drivers
Below you can download tally dascom 1430 driver for Windows.
File name: tally-dascom-1430.exe
Version: 3.267
File size: 13.60 MB
Upload source: original install disk
Antivirus software passed: F-Secure ver. 5.28
Tally Dascom 1430 Drivers
(click above to download)
Device Specification:
- Model: Tally Dascom 1430
- Type: Dot Matrix Printer
- Print Technology: Impact dot matrix
- Printing Speed: 600 lines per minute (LPM)
- Print Resolution: 240 x 360 dpi
- Character Density: 10, 12, 15, 16.6, 17.1, 20 cpi (characters per inch)
- Connectivity: USB, Parallel
- Paper Handling: Continuous forms, Cut sheets, Envelopes
- Paper Width: 3-16 inches
- Multi-Part Forms: Up to 1+6 copies
- Power Supply: 110-240 V AC, 50/60 Hz
Troubleshooting Questions and Answers:
1. Q: Why is my Tally Dascom 1430 not printing anything?
A: There could be several reasons for this issue:
1) Make sure the power supply is properly connected and the printer is turned on.
2) Check if the paper is loaded correctly and there are no paper jams.
3) Verify that the correct printer driver is installed on your computer.
2. Q: How do I resolve blurred printing issues with my Tally Dascom 1430?
A: Blurred printing can be caused by a few factors:
1) Ensure the print head is clean by following the manufacturer's instructions for maintenance.
2) Check if the correct print quality settings are selected in the printer driver settings.
3) Replace the printer ribbon if it is old or worn out, as it can affect print clarity.
3. Q: Why is my Tally Dascom 1430 printing with distorted characters?
A: Character distortion can be addressed by taking the following steps:
1) Ensure the paper feed is aligned properly and not skewed.
2) Check the print head alignment and adjust it if necessary.
3) If using multi-part forms, ensure that all copies are aligned correctly and securely fastened together.
Note: Troubleshooting steps may vary depending on the specific issue and it is recommended to refer to the device's user manual or contact technical support for further assistance.
File name: tally-dascom-1430.exe
Version: 3.267
File size: 13.60 MB
Upload source: original install disk
Antivirus software passed: F-Secure ver. 5.28
Tally Dascom 1430 Drivers
(click above to download)
Device Specification:
- Model: Tally Dascom 1430
- Type: Dot Matrix Printer
- Print Technology: Impact dot matrix
- Printing Speed: 600 lines per minute (LPM)
- Print Resolution: 240 x 360 dpi
- Character Density: 10, 12, 15, 16.6, 17.1, 20 cpi (characters per inch)
- Connectivity: USB, Parallel
- Paper Handling: Continuous forms, Cut sheets, Envelopes
- Paper Width: 3-16 inches
- Multi-Part Forms: Up to 1+6 copies
- Power Supply: 110-240 V AC, 50/60 Hz
Troubleshooting Questions and Answers:
1. Q: Why is my Tally Dascom 1430 not printing anything?
A: There could be several reasons for this issue:
1) Make sure the power supply is properly connected and the printer is turned on.
2) Check if the paper is loaded correctly and there are no paper jams.
3) Verify that the correct printer driver is installed on your computer.
2. Q: How do I resolve blurred printing issues with my Tally Dascom 1430?
A: Blurred printing can be caused by a few factors:
1) Ensure the print head is clean by following the manufacturer's instructions for maintenance.
2) Check if the correct print quality settings are selected in the printer driver settings.
3) Replace the printer ribbon if it is old or worn out, as it can affect print clarity.
3. Q: Why is my Tally Dascom 1430 printing with distorted characters?
A: Character distortion can be addressed by taking the following steps:
1) Ensure the paper feed is aligned properly and not skewed.
2) Check the print head alignment and adjust it if necessary.
3) If using multi-part forms, ensure that all copies are aligned correctly and securely fastened together.
Note: Troubleshooting steps may vary depending on the specific issue and it is recommended to refer to the device's user manual or contact technical support for further assistance.
Re: Re: Tally Dascom 1430 Drivers
Thank you so much for providing the link to the working Windows driver for the Tally Dascom 1430. I have been searching everywhere for this and your help is greatly appreciated!