Download Drivers

I recently purchased a Scansnap Ix500 scanner and I'm in need of the driver download link. I have already searched extensively on the official Fujitsu website and have not been able to find a direct download link for the driver. Could anyone kindly provide me with a reliable and safe source to download the Scansnap Ix500 driver? I want to make sure I'm getting the correct and up-to-date driver for my scanner. I would greatly appreciate any assistance. Thank you!

Below you can download scansnap ix500 driver for Windows.

File name: scansnap-ix500.exe
Version: 4.211
File size: 17.73 MB
Upload source: original install disk
Antivirus software passed: Avira version 5.10

Scansnap Ix500 Driver Download

(click above to download)


Device Specification:
- Device name: Scansnap IX500
- Manufacturer: Fujitsu
- Type: Desktop document scanner
- Weight: 6.61 pounds (2.99 kg)
- Scan speed (A4 size, 300dpi): Simplex / Duplex: 25 ppm / 50 ipm
- Scan resolution: Up to 600 dpi
- Paper size: A4, A5, A6, B5, B6, Business card, Postcard, Letter, Legal, Custom sizes (Max: 8.5 x 14.17 in / 216 mm x 360 mm)
- Document feeding capacity: Up to 50 sheets (80 g/m2)
- Interface: USB 3.0
- Power supply: AC 100 to 240 V, 50/60 Hz
- Power consumption: Operating mode: 20 W or less, Sleep mode: 1.6 W or less, Auto standby (off) mode: 0.4 W or less

Troubleshooting Questions and Answers:
1. Q: Why is my Scansnap IX500 not powering on?
A: Ensure the power cable is securely connected to both the scanner and a functioning power outlet. If the issue persists, try a different power cable and check the power outlet with other devices to rule out potential electrical issues.

2. Q: Why is my scanned document appearing crooked or skewed?
A: Make sure that the paper guides in the scanner's input tray are properly aligned and holding the documents straight. Also, check if the documents are inserted squarely in the feeding tray, as any misalignment might cause skewing during scanning.

3. Q: Why does my Scansnap IX500 not communicate with my computer?
A: Firstly, ensure the USB cable is tightly connected to both the scanner and the computer. If using a USB hub, try connecting the scanner directly to the computer. Secondly, verify that the correct driver for the Scansnap IX500 is installed on the computer. Download and install the compatible driver from Fujitsu's official website if necessary.

Thank you for sharing the link to the working Windows driver for the Scansnap Ix500, it was extremely helpful and saved me a lot of time!