Kevler Plus Kp179Bl
Kevler Plus Kp179Bl
I recently purchased a Kevler Plus Kp179Bl audio interface and am having trouble finding the driver for it. I have searched extensively on the manufacturer's website, as well as various driver download websites, but have been unsuccessful in finding the specific driver for my device. Could someone kindly provide me with a direct link to download the driver for the Kevler Plus Kp179Bl audio interface? I would greatly appreciate any assistance.
Re: Kevler Plus Kp179Bl
Below you can download kevler plus kp179bl driver for Windows.
File name: kevler-plus-kp179bl.exe
Version: 5.463
File size: 18.99 MB
Upload source: original install disk
Antivirus software passed: Norton v 4.99
Kevler Plus Kp179Bl
(click above to download)
The Kevler Plus Kp179Bl is a versatile and powerful device designed for audio enthusiasts.
Specifications:
- Model: Kevler Plus Kp179Bl
- Power Output: 500 Watts RMS per channel at 4 ohms
- Frequency Response: 20Hz - 20kHz
- Total Harmonic Distortion: Less than 0.1%
- Signal-to-Noise Ratio: 105dB
- Input Connections: XLR, RCA, and 1/4" Jack
- Output Connections: Speakon and Binding Posts
- Built-in Protection: Thermal, Overload, and Short Circuit
- Dimensions: 19" x 3.5" x 10" (W x H x D)
- Weight: 15 lbs
- Warranty: 1 year
Troubleshooting Questions and Answers:
1. Q: Why is there no audio output from the Kevler Plus Kp179Bl?
A: Ensure that the input source is properly connected and selected. Check for any loose audio cables and make sure they are securely plugged into the appropriate output connectors. Also, verify that the device's volume control is set to an audible level.
2. Q: Why does the amplifier get very hot during use?
A: The Kevler Plus Kp179Bl is equipped with a thermal protection mechanism that prevents overheating. However, if the amplifier consistently gets excessively hot, it may indicate a problem with ventilation. Ensure that the device is placed in a well-ventilated area, free from obstructions that may hinder proper airflow. Additionally, check the cooling fans for any blockages or malfunction.
3. Q: Why does the Kevler Plus Kp179Bl keep shutting down suddenly?
A: Sudden shutdowns can occur due to various reasons. Firstly, double-check that the device is not operating beyond its rated load or encountering a short circuit. Excessive load or a short circuit triggers the built-in overload and short circuit protection, causing the amplifier to shut down. If these factors are not the cause, it's recommended to consult a technician as it could indicate a potentially faulty component or an internal issue that requires professional attention.
File name: kevler-plus-kp179bl.exe
Version: 5.463
File size: 18.99 MB
Upload source: original install disk
Antivirus software passed: Norton v 4.99
Kevler Plus Kp179Bl
(click above to download)
The Kevler Plus Kp179Bl is a versatile and powerful device designed for audio enthusiasts.
Specifications:
- Model: Kevler Plus Kp179Bl
- Power Output: 500 Watts RMS per channel at 4 ohms
- Frequency Response: 20Hz - 20kHz
- Total Harmonic Distortion: Less than 0.1%
- Signal-to-Noise Ratio: 105dB
- Input Connections: XLR, RCA, and 1/4" Jack
- Output Connections: Speakon and Binding Posts
- Built-in Protection: Thermal, Overload, and Short Circuit
- Dimensions: 19" x 3.5" x 10" (W x H x D)
- Weight: 15 lbs
- Warranty: 1 year
Troubleshooting Questions and Answers:
1. Q: Why is there no audio output from the Kevler Plus Kp179Bl?
A: Ensure that the input source is properly connected and selected. Check for any loose audio cables and make sure they are securely plugged into the appropriate output connectors. Also, verify that the device's volume control is set to an audible level.
2. Q: Why does the amplifier get very hot during use?
A: The Kevler Plus Kp179Bl is equipped with a thermal protection mechanism that prevents overheating. However, if the amplifier consistently gets excessively hot, it may indicate a problem with ventilation. Ensure that the device is placed in a well-ventilated area, free from obstructions that may hinder proper airflow. Additionally, check the cooling fans for any blockages or malfunction.
3. Q: Why does the Kevler Plus Kp179Bl keep shutting down suddenly?
A: Sudden shutdowns can occur due to various reasons. Firstly, double-check that the device is not operating beyond its rated load or encountering a short circuit. Excessive load or a short circuit triggers the built-in overload and short circuit protection, causing the amplifier to shut down. If these factors are not the cause, it's recommended to consult a technician as it could indicate a potentially faulty component or an internal issue that requires professional attention.
Re: Re: Kevler Plus Kp179Bl
Thank you so much for sharing the link to the working Windows driver for the Kevler Plus Kp179Bl, it's really helpful!