Jbl Tune 500Bt Driver
Jbl Tune 500Bt Driver
I am having trouble finding the driver for the JBL Tune 500BT headphones. I have searched on the JBL website and other online sources, but I couldn't find a direct link to download the driver. Could someone please provide me with a reliable source or a direct link to download the driver? Your help would be greatly appreciated.
Re: Jbl Tune 500Bt Driver
Below you can download jbl tune 500bt driver for Windows.
File name: jbl-tune-500bt.exe
Version: 2.734
File size: 44811 MB
Upload source: original install disk
Antivirus software passed: G Data v. 4.87
Jbl Tune 500Bt Driver
(click above to download)
JBL Tune 500BT Driver Specifications:
- Dimensions: 8.2 x 3.1 x 7.8 inches
- Weight: 5.6 ounces
- Bluetooth Version: 4.1
- Battery Type: Lithium-ion polymer (3.7V, 300mAh)
- Music Playtime: Up to 16 hours
- Charging Time: 2 hours
- Driver Size: 32mm
- Frequency Response: 20Hz - 20kHz
- Impedance: 32 ohms
- Sensitivity: 1kHz - 24mV dB v/pa
- Microphone Sensitivity: -24dBV at 1kHz/Pa
- Signal-to-Noise Ratio: >80dB
Troubleshooting Questions and Answers:
Q1: My JBL Tune 500BT Driver is not turning on. What can I do?
A1: First, make sure the device is charged by connecting it to a power source for at least 2 hours. If it still doesn't turn on, try resetting it by pressing and holding the power button for 10 seconds. If the issue persists, contact JBL customer support for further assistance.
Q2: I am having trouble connecting my JBL Tune 500BT Driver to my smartphone. What should I check?
A2: Ensure that Bluetooth is enabled on your smartphone and that it is within the device's range (approximately 33 feet). Resetting the Bluetooth connection on both devices might also help. If the problem persists, try forgetting the device on your smartphone's Bluetooth settings and then reconnecting. If none of these steps work, check for any firmware updates for the device or seek technical support.
Q3: The sound quality of my JBL Tune 500BT Driver seems distorted or too low. How can I fix this?
A3: Firstly, check if the volume on both your connected device and the headphone is set to an adequate level. If the sound remains distorted or low, try adjusting the equalizer settings on your source device to optimize the audio output. Additionally, check if any debris or dirt is blocking the headphone's speaker drivers, as this can affect the sound quality. If the issue persists, consider testing the device with another audio source to determine if it's a problem with the headphone or the source device.
File name: jbl-tune-500bt.exe
Version: 2.734
File size: 44811 MB
Upload source: original install disk
Antivirus software passed: G Data v. 4.87
Jbl Tune 500Bt Driver
(click above to download)
JBL Tune 500BT Driver Specifications:
- Dimensions: 8.2 x 3.1 x 7.8 inches
- Weight: 5.6 ounces
- Bluetooth Version: 4.1
- Battery Type: Lithium-ion polymer (3.7V, 300mAh)
- Music Playtime: Up to 16 hours
- Charging Time: 2 hours
- Driver Size: 32mm
- Frequency Response: 20Hz - 20kHz
- Impedance: 32 ohms
- Sensitivity: 1kHz - 24mV dB v/pa
- Microphone Sensitivity: -24dBV at 1kHz/Pa
- Signal-to-Noise Ratio: >80dB
Troubleshooting Questions and Answers:
Q1: My JBL Tune 500BT Driver is not turning on. What can I do?
A1: First, make sure the device is charged by connecting it to a power source for at least 2 hours. If it still doesn't turn on, try resetting it by pressing and holding the power button for 10 seconds. If the issue persists, contact JBL customer support for further assistance.
Q2: I am having trouble connecting my JBL Tune 500BT Driver to my smartphone. What should I check?
A2: Ensure that Bluetooth is enabled on your smartphone and that it is within the device's range (approximately 33 feet). Resetting the Bluetooth connection on both devices might also help. If the problem persists, try forgetting the device on your smartphone's Bluetooth settings and then reconnecting. If none of these steps work, check for any firmware updates for the device or seek technical support.
Q3: The sound quality of my JBL Tune 500BT Driver seems distorted or too low. How can I fix this?
A3: Firstly, check if the volume on both your connected device and the headphone is set to an adequate level. If the sound remains distorted or low, try adjusting the equalizer settings on your source device to optimize the audio output. Additionally, check if any debris or dirt is blocking the headphone's speaker drivers, as this can affect the sound quality. If the issue persists, consider testing the device with another audio source to determine if it's a problem with the headphone or the source device.
Re: Re: Jbl Tune 500Bt Driver
Thank you for providing the link to the working windows driver for the Jbl Tune 500Bt, it was extremely helpful and I was able to install it without any issues!