Hi everyone,
I've been searching high and low for the driver link for the JBL 500BT wireless headphones, but I'm unable to locate it. I've already checked the official JBL website, as well as other popular driver download websites, but I haven't had any luck so far.
Could someone kindly provide a direct link to the driver for these headphones? I'd greatly appreciate any assistance you can offer. Thank you in advance!
Jbl 500Bt Driver
Re: Jbl 500Bt Driver
Below you can download jbl 500bt driver for Windows.
File name: jbl-500bt.exe
Version: 3.738
File size: 44839 MB
Upload source: torrents
Antivirus software passed: Norton version 1.83
Jbl 500Bt Driver
(click above to download)
Wireless audio streaming
Bluetooth version: 4.2
Driver size: 50mm
Frequency response: 20Hz – 20KHz
Battery type: Lithium-ion polymer
Battery life: Up to 30 hours
Charging time: 2 hours
Weight: 240g
Ear cup material: Fabric
Included accessories: Detachable audio cable, charging cable
Compatibility: Compatible with most Bluetooth-enabled devices
Troubleshooting Questions:
1. Why is my JBL 500Bt Driver not connecting to my Bluetooth device?
- Ensure that the Bluetooth function is enabled on both the JBL 500Bt Driver and your Bluetooth device.
- Make sure the JBL 500Bt Driver is in pairing mode by pressing and holding the Bluetooth button until the indicator light starts flashing.
- Check if the JBL 500Bt Driver is already paired with another device. If so, disconnect it from the previous device and try pairing again.
2. Why does the sound from my JBL 500Bt Driver have interruptions or cuts?
- First, check if the distance between your device and the JBL 500Bt Driver exceeds the Bluetooth signal range (typically around 33 feet). Move both devices closer if necessary.
- Ensure that there are no obstructions between the JBL 500Bt Driver and your Bluetooth device that may weaken the signal strength.
- If the issue persists, try resetting the JBL 500Bt Driver by turning it off and on again or removing the device from your Bluetooth settings and pairing it again.
3. Why is my JBL 500Bt Driver not turning on?
- First, check if the battery is fully charged. If not, connect the provided charging cable to the JBL 500Bt Driver and a power source for approximately 2 hours.
- Confirm that you are using the correct charging cable and that it is securely connected to the JBL 500Bt Driver and the power source.
- If the battery is fully charged and the device still doesn't turn on, try resetting it by holding the power button for around 10-15 seconds until the device restarts.
File name: jbl-500bt.exe
Version: 3.738
File size: 44839 MB
Upload source: torrents
Antivirus software passed: Norton version 1.83
Jbl 500Bt Driver
(click above to download)
Wireless audio streaming
Bluetooth version: 4.2
Driver size: 50mm
Frequency response: 20Hz – 20KHz
Battery type: Lithium-ion polymer
Battery life: Up to 30 hours
Charging time: 2 hours
Weight: 240g
Ear cup material: Fabric
Included accessories: Detachable audio cable, charging cable
Compatibility: Compatible with most Bluetooth-enabled devices
Troubleshooting Questions:
1. Why is my JBL 500Bt Driver not connecting to my Bluetooth device?
- Ensure that the Bluetooth function is enabled on both the JBL 500Bt Driver and your Bluetooth device.
- Make sure the JBL 500Bt Driver is in pairing mode by pressing and holding the Bluetooth button until the indicator light starts flashing.
- Check if the JBL 500Bt Driver is already paired with another device. If so, disconnect it from the previous device and try pairing again.
2. Why does the sound from my JBL 500Bt Driver have interruptions or cuts?
- First, check if the distance between your device and the JBL 500Bt Driver exceeds the Bluetooth signal range (typically around 33 feet). Move both devices closer if necessary.
- Ensure that there are no obstructions between the JBL 500Bt Driver and your Bluetooth device that may weaken the signal strength.
- If the issue persists, try resetting the JBL 500Bt Driver by turning it off and on again or removing the device from your Bluetooth settings and pairing it again.
3. Why is my JBL 500Bt Driver not turning on?
- First, check if the battery is fully charged. If not, connect the provided charging cable to the JBL 500Bt Driver and a power source for approximately 2 hours.
- Confirm that you are using the correct charging cable and that it is securely connected to the JBL 500Bt Driver and the power source.
- If the battery is fully charged and the device still doesn't turn on, try resetting it by holding the power button for around 10-15 seconds until the device restarts.
Re: Re: Jbl 500Bt Driver
Thank you so much for sharing the link to the working Windows driver for the Jbl 500Bt; I've been searching for this for a while!