Hi there,
I've been trying to find the driver for my Imicro Router NT-WR54M, but unfortunately, I haven't had any luck so far. I've searched on the official Imicro website and various other driver websites, but I couldn't find a direct download link for the driver. Can someone please provide me with a reliable source or direct download link for the Imicro Router NT-WR54M driver? Any assistance would be greatly appreciated. Thank you in advance!
Imicro Router Nt-Wr54M Manual
Re: Imicro Router Nt-Wr54M Manual
Below you can download imicro router nt-wr54m manual driver for Windows.
File name: imicro-router-nt-wr54m-manual.exe
Version: 5.622
File size: 15.73 MB
Upload source: manufactuter website
Antivirus software passed: Avira v 3.60
Imicro Router Nt-Wr54M Manual
(click above to download)
Device Specification:
- Model: Imicro Router NT-WR54M
- Dimensions: 6.6 x 4.4 x 1.1 inches (16.8 x 11.2 x 2.8 cm)
- Weight: 7.2 ounces (204 grams)
- Wireless Standards: IEEE 802.11b/g
- Wireless Security: WEP, WPA, WPA2
- Frequency Band: 2.4 GHz
- LAN Ports: 4 x 10/100 Mbps RJ-45
- WAN Port: 1 x 10/100 Mbps RJ-45
- Antennas: 2 x External Omnidirectional Antennas
- Power Supply: 9V DC, 1A
- LED Indicators: Power, LAN, WAN, WLAN
Troubleshooting Questions and Answers:
1. Q: Why is my Imicro Router NT-WR54M not connecting to the internet?
A: First, ensure that the WAN cable is securely connected to the router and the modem. Check if the modem is working properly and if the internet service is active. Try power cycling the router by unplugging it from the power source for 10 seconds, then reconnect and wait for the lights to stabilize. If the issue persists, refer to the user manual for advanced troubleshooting steps or contact technical support.
2. Q: Can I change the wireless network name (SSID) and password of my Imicro Router NT-WR54M?
A: Yes, you can change the SSID and password by accessing the router's web-based configuration interface. Open a web browser and enter the default gateway IP address (usually 192.168.0.1 or 192.168.1.1) in the address bar. Log in using the default username and password provided in the manual. Once logged in, navigate to the wireless settings section and customize the SSID and password to your preference. Remember to save the changes for them to take effect.
3. Q: How can I update the firmware of my Imicro Router NT-WR54M?
A: To update the router's firmware, visit the official Imicro website or the manufacturer's support page and search for the latest firmware version for your specific model. Download the firmware file and save it to your computer. Access the router's web-based configuration interface by entering the default gateway IP address in a web browser. Log in
File name: imicro-router-nt-wr54m-manual.exe
Version: 5.622
File size: 15.73 MB
Upload source: manufactuter website
Antivirus software passed: Avira v 3.60
Imicro Router Nt-Wr54M Manual
(click above to download)
Device Specification:
- Model: Imicro Router NT-WR54M
- Dimensions: 6.6 x 4.4 x 1.1 inches (16.8 x 11.2 x 2.8 cm)
- Weight: 7.2 ounces (204 grams)
- Wireless Standards: IEEE 802.11b/g
- Wireless Security: WEP, WPA, WPA2
- Frequency Band: 2.4 GHz
- LAN Ports: 4 x 10/100 Mbps RJ-45
- WAN Port: 1 x 10/100 Mbps RJ-45
- Antennas: 2 x External Omnidirectional Antennas
- Power Supply: 9V DC, 1A
- LED Indicators: Power, LAN, WAN, WLAN
Troubleshooting Questions and Answers:
1. Q: Why is my Imicro Router NT-WR54M not connecting to the internet?
A: First, ensure that the WAN cable is securely connected to the router and the modem. Check if the modem is working properly and if the internet service is active. Try power cycling the router by unplugging it from the power source for 10 seconds, then reconnect and wait for the lights to stabilize. If the issue persists, refer to the user manual for advanced troubleshooting steps or contact technical support.
2. Q: Can I change the wireless network name (SSID) and password of my Imicro Router NT-WR54M?
A: Yes, you can change the SSID and password by accessing the router's web-based configuration interface. Open a web browser and enter the default gateway IP address (usually 192.168.0.1 or 192.168.1.1) in the address bar. Log in using the default username and password provided in the manual. Once logged in, navigate to the wireless settings section and customize the SSID and password to your preference. Remember to save the changes for them to take effect.
3. Q: How can I update the firmware of my Imicro Router NT-WR54M?
A: To update the router's firmware, visit the official Imicro website or the manufacturer's support page and search for the latest firmware version for your specific model. Download the firmware file and save it to your computer. Access the router's web-based configuration interface by entering the default gateway IP address in a web browser. Log in
Re: Re: Imicro Router Nt-Wr54M Manual
Thank you so much for providing the link to the working Windows driver for the Imicro Router Nt-Wr54M - it worked perfectly and saved me a lot of frustration!