Geekcreit Uno Driver Windows 10
Geekcreit Uno Driver Windows 10
I need help finding the driver for my Geekcreit Uno for Windows 10. I have tried searching on the official Geekcreit website and on various driver download websites, but I haven't been successful in finding the specific driver I need. Can anyone provide me with a direct link to download the driver? I would greatly appreciate any assistance. Thank you in advance!
Re: Geekcreit Uno Driver Windows 10
Below you can download geekcreit uno windows 10 driver for Windows.
File name: geekcreit-uno-win10.exe
Version: 4.377
File size: 13089 MB
Upload source: manufactuter website
Antivirus software passed: McAfee v. 5.99
Geekcreit Uno Driver Windows 10
(click above to download)
Specifications:
- Device Name: Geekcreit Uno
- Supported Operating System: Windows 10
- Power Source: USB or external power supply (7-12V)
- Microcontroller: ATmega328P
- Clock Speed: 16 MHz
- Digital I/O Pins: 14 (6 of them provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB
- SRAM: 2 KB
- EEPROM: 1 KB
- Interface: USB Type-B
Troubleshooting Questions and Answers:
1. Q: Why is my Geekcreit Uno not recognized by Windows 10?
A: Firstly, make sure you have installed the necessary driver for the device. You can download the driver from the official website or the manufacturer's support page. Additionally, try using a different USB cable or port, as a faulty cable or port may cause connection issues.
2. Q: Why is my Geekcreit Uno not powering up?
A: Ensure that the external power supply (if used) is providing the correct voltage within the recommended range (7-12V). Check the power supply connection to the board for any loose or faulty connections. Verify that the onboard LEDs are lighting up, indicating proper power supply. If not, try using a different power source.
3. Q: Why are my digital inputs not working on the Geekcreit Uno?
A: Make sure you have correctly set the pinMode of the corresponding pins as inputs in your code. Verify the wiring connections, ensuring they are properly connected to the correct digital input pins. Double-check that your code is correctly reading the digital input states and respond accordingly.
File name: geekcreit-uno-win10.exe
Version: 4.377
File size: 13089 MB
Upload source: manufactuter website
Antivirus software passed: McAfee v. 5.99
Geekcreit Uno Driver Windows 10
(click above to download)
Specifications:
- Device Name: Geekcreit Uno
- Supported Operating System: Windows 10
- Power Source: USB or external power supply (7-12V)
- Microcontroller: ATmega328P
- Clock Speed: 16 MHz
- Digital I/O Pins: 14 (6 of them provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB
- SRAM: 2 KB
- EEPROM: 1 KB
- Interface: USB Type-B
Troubleshooting Questions and Answers:
1. Q: Why is my Geekcreit Uno not recognized by Windows 10?
A: Firstly, make sure you have installed the necessary driver for the device. You can download the driver from the official website or the manufacturer's support page. Additionally, try using a different USB cable or port, as a faulty cable or port may cause connection issues.
2. Q: Why is my Geekcreit Uno not powering up?
A: Ensure that the external power supply (if used) is providing the correct voltage within the recommended range (7-12V). Check the power supply connection to the board for any loose or faulty connections. Verify that the onboard LEDs are lighting up, indicating proper power supply. If not, try using a different power source.
3. Q: Why are my digital inputs not working on the Geekcreit Uno?
A: Make sure you have correctly set the pinMode of the corresponding pins as inputs in your code. Verify the wiring connections, ensuring they are properly connected to the correct digital input pins. Double-check that your code is correctly reading the digital input states and respond accordingly.
Re: Re: Geekcreit Uno Driver Windows 10
Thank you so much for sharing the link to the working windows driver for the Geekcreit Uno, it saved me a lot of time and frustration!