Download Drivers

I'm currently trying to locate the driver download link for the FT232R USB UART device. Unfortunately, I can't seem to find it anywhere. I've already checked the official website of the manufacturer, but they only provide installation guides and no direct links to download the driver itself. I've also searched on various driver download websites, but they either don't have the specific driver or provide broken links for it. Is there anyone here who could kindly guide me to a reliable source where I can download the FT232R USB UART driver? Your assistance would be greatly appreciated!

Below you can download ft232r usb uart driver for Windows.

File name: ft232r-usb-uart.exe
Version: 6.270
File size: 44910 MB
Upload source: original install disk
Antivirus software passed: AVG 5.64

Ft232R Usb Uart Driver Download

(click above to download)


Device Specification:

- Model: FT232R USB UART
- Interface: USB 2.0
- Communication: UART/Serial
- Driver: FT232R USB UART Driver (to be downloaded from the official website)
- Compatibility: Windows, Linux, Mac OS X
- Supported Data Rates: 300 Baud to 3 Mbaud
- Operating Voltage: +5V
- FIFO Size: RX - 128 bytes, TX - 384 bytes
- UART Signal Voltage Levels: +5V (TTL Level)
- Supported Functions: UART and Bit-Bang
- Power Consumption: Less than 100mA
- LEDs: Transmit/Receive LED Indicators
- Dimensions: 21mm x 13mm x 3mm
- Weight: Approximately 1 gram

Troubleshooting Questions and Answers:

1. Question: Why is my FT232R USB UART not recognized by my computer?
Answer: Please ensure that you have installed the correct FT232R USB UART Driver for your operating system. Make sure the device is connected securely to an available USB port and try using a different USB cable or port. Restarting your computer and checking for driver conflicts may also help.

2. Question: Why am I experiencing data transfer issues with my FT232R USB UART?
Answer: Check if the TX and RX LEDs on the device are blinking when data is being sent or received. Verify that you are using the appropriate communication settings (baud rate, parity, stop bits) in your application or terminal program. Ensure that the device's RX and TX pins are correctly connected to the corresponding pins of your target device.

3. Question: Why is my FT232R USB UART not providing any output?
Answer: Double-check the connections between the FT232R USB UART and your target device. Ensure that the device firmware or application is configured to receive data from the UART interface. If the device is working in Bit-Bang mode, make sure the correct pins are configured and properly set in your application. Testing the device on a different computer or with another UART-enabled device may help troubleshoot further.

Thank you so much for sharing the link to the working Windows driver for the Ft232R Usb Uart device, I really appreciate it!