Download Drivers

I've been trying to find the driver download for the Zebra Gk420T printer on Windows 10 64-bit, but I've had no luck so far. I've searched on the official Zebra website, as well as on other driver download sites, but I couldn't find a compatible driver for my operating system. I even tried using the Windows Update feature, but it couldn't locate the driver either. Can someone please provide me with a direct link to download the driver? Any help would be greatly appreciated.

Below you can download zebra gk420t windows 10 64 bit driver for Windows.

File name: zebra-gk420t_win1064-bit.exe
Version: 6.940
File size: 15.72 MB
Upload source: manufactuter website
Antivirus software passed: AVG v 4.85

Zebra Gk420T Driver Download Windows 10 64 Bit

(click above to download)


Device Specification:
- Name: Zebra GK420T
- Driver Compatibility: Windows 10 (64-bit)
- Printer Type: Thermal Transfer
- Printing Method: Direct Thermal, Thermal Transfer
- Resolution: 203 dpi (8 dots/mm)
- Print Speed: Up to 5 inches/127 mm per second
- Print Width: 4.09 inches/104 mm
- Connectivity: USB, Serial, Parallel
- Memory: 8 MB Flash, 8 MB SDRAM
- Media Type: Roll-fed or fanfold, die-cut or continuous, direct thermal or thermal transfer labels or tags
- Media Thickness: 0.003 inches/0.08 mm to 0.0075 inches/0.19 mm
- Media Roll Size: Outer diameter up to 5 inches/127 mm, inner diameter from 0.5 inches/12.7 mm to 1.0 inches/25.4 mm

Troubleshooting Questions and Answers:
Q1: Why is my Zebra GK420T not printing anything?
A1: Ensure the paper is loaded correctly and the printhead is clean. Check if the printer driver is installed properly and try restarting the printer. If the issue persists, contact Zebra technical support for further assistance.

Q2: How do I fix the barcode quality issues on my Zebra GK420T printer?
A2: Check if the barcode is properly designed and that the barcode symbology is supported by the printer. Verify the media type and ensure it is suitable for barcode printing. Clean the printhead and adjust the darkness settings in the driver software. If the problem continues, consider calibrating the printer or consult Zebra support.

Q3: Why does my Zebra GK420T display an error light and not respond?
A3: Check for any paper jams or obstructions inside the printer mechanism and remove them if found. Ensure the printer is properly connected to the power source and all cables are securely plugged in. Reset the printer by turning it off and on; if the error persists, refer to the user manual or contact Zebra technical support for assistance.

Thank you so much for providing the link to the working Windows driver for the Zebra GK420T. I've been searching everywhere for this!